How To Change The Code On Kwikset Lock

Introduction

If you have a Kwikset lock, it is essential to know how to change the lock code for your home. This tin can be useful if at that place'southward a problem with the lock or if you want to alter the code for some other reason. Irresolute the lawmaking on Kwikset locks is simple and simply takes a few minutes.

How to change the code on the Kwikset lock?

If you lot forget your Kwikset lock code or call back your current Kwikset lock codes are unsafe, you must change The Kwikset lock code.

And The Kwikset has too many unlike models, and so the steps of changing the code on the Kwikset locks are slightly different. Now let'south innovate how to alter the code on Kwikset locks co-ordinate to other models.

In general, to modify the Kwikset lock user lawmaking:

1. Gear up your Kwikset lock principal code if you have enabled a programming code.
2. Delete the Kwikset lock code you want to modify.
3. Add a new Kwikset lock user code.
4. Change the Kwikset lock user lawmaking successfully.

To know more than near Kwikset lock problems and troubleshooting, please cheque this article: Kwikset Smart Lock Not Working. Expert Troubleshooting Guide.

How to change the code on Kwikset SmartCode 909, 910, 911, and 912?

To modify the Kwikset SmartCode 909, you must add a new user code to the same position. For example, if you want to change the third user code, add a dissimilar user code in position three.

How to change the user coder on Kwikset Smartcode 909, 910, 911, and 912 without the primary code?

1. Make sure the door is open. Printing the Program button for the number of times corresponding to the programmed user code position.
2. Enter user code. A total of 8 user codes may be programmed.
3. Printing the Lock push one time.

How to c hange the user coder on Kwikset Smartcode 909, 910, 911 , and 912 with the master code?

1. Go on the door open. Press the Program push button one time. The keypad will flash green, and y'all will hear three beeps.
2. Enter Master lawmaking
3. Press the Lock push once
4. Press the Plan button for the number of times corresponding to the programmed user code position. Instance: If programming the third code, press the push button three times
5. If you cannot call back the user code position, y'all may wish to perform a manufacturing plant reset Kwikset lock to delete all codes associated with the lock.
6. Enter new user code.
7. Press the Lock push once.

How to change the master lawmaking on Kwikset Smartcode 909, 910, 911, and 912:

1. Go along the door open. Press and Hold the Plan button until the keypad flashes dark-green (about 5 seconds).
2. Enter new Master code.
3. Press the Lock button in one case.
4. Re-enter the Primary code.
5. Press the Lock button once.

If programming is successful, the keypad will flash green once with one beep.

If programming is unsuccessful, the keypad will flash ruby three times with three beeps.

Please note:

• If y'all cannot remember the user code position, you may asking a manufacturing plant reset to delete all codes associated with the lock.
• If no push button is pressed for 5 seconds, the system will time out, and yous volition need to restart the procedure.

For more assist most Kwikset Smartcode Deadbolt locks, delight check this commodity: Detailed Kwikset SmartCode Deadbolt Troubleshooting Guide.

How to change the code on Kwikset SmartCode 888, 913, and 914?

To change the user code on Kwikset SmartCode 888, 913, and 914, you will demand to delete this user code first and then add a new user lawmaking.

How to delete a single user code with the principal code on Kwikset SmartCode 888, 913, and 914?

1. Keep the door open up. Press the Program button once. The keypad will flash green, and you will hear three beeps.
2. Press the Lock push button once.
3. Enter the Master code.
4. Press the Lock push button once.
5. Enter the user code to be deleted.
6. Press the Lock button once.
7. Re-enter the user code to be deleted.
8. Printing the Lock button once.

How to delete a single user lawmaking without the chief code on Kwikset SmartCode 888, 913, and 914?

1. Keep the door open. Press the Programme button one time.
2. Press the Lock button once.
3. Enter the user lawmaking to be deleted.
4. Press the Lock button in one case.
5. Re-enter the user code.
6. Press the Lock button one time.

If programming is successful, the keypad will flash green once with 1 beep.

If programming is unsuccessful, the keypad volition flash ruddy iii times with three beeps.

How to add User Codes with the Chief code on Kwikset SmartCode 888, 913, and 914?

1. Continue the door open. Printing the Program button once. The keypad will flash light-green, and yous volition hear three beeps.
2. Enter the Primary code.
3. Printing the Lock push button once.
4. Enter the new user code.
5. Press the Lock button one time.

How to add together User Codes without the Principal code on Kwikset SmartCode 888, 913, and 914?

1. Go on the door open up. Printing the Program button once.
2. Enter the new user code.
3. Press the Lock button one time.

How to alter the master code on Kwikset SmartCode 888, 913, and 914?

1. Keep the door open. Press and Concur the Program button until the keypad flashes greenish (well-nigh 5 seconds).
2. Enter new Master lawmaking.
3. Press the Lock push button once.
4. Re-enter the Master code.
5. Press the Lock button once.

Please note: If no push is pressed for five seconds, the system will time out for all the in a higher place operations.

How to change the code on Kwikset SmartCode 915 and 916?

To change the user code on Kwikset SmartCode 915 and 916, you will need to delete this user code offset so add a new user lawmaking.

How to delete a single user code with the primary code on Kwikset SmartCode 915 and 916?

1. Proceed the door open up. Press the Program button one time. The Checkmark volition flash v times, and you volition hear v beeps.
2. Printing the Checkmark symbol once.
3. Printing the Lock symbol once.
4. Enter the Principal code.
5. Press the Lock symbol once.
6. Enter the user code to be deleted.
7. Press the Lock symbol once.
8. Re-enter the user code to be deleted.
9. Printing the Lock symbol in one case.

How to delete a single user code without the main lawmaking on Kwikset SmartCode 915 and 916?

1. Continue the door open. Press the Printing Checkmark symbol once.
2. Press the Lock symbol once.
3. Enter the user code to be deleted.
4. Press the Lock symbol one time.
5. Re-enter the user lawmaking.
6. Press the Lock symbol once.

If programming is successful, the keypad will flash green once with one beep.

If programming is unsuccessful, the keypad volition wink red three times with three beeps.

How to add together User Codes with the Master lawmaking on Kwikset SmartCode 915 and 916?

1. Keep the door open. Printing the Program push button once. The Checkmark will wink five times, and you volition hear v beeps.
2. Printing the Checkmark symbol once.
3. Enter the Master code.
4. Press the Lock symbol once.
5. Enter the new user lawmaking.
6. Press the Lock symbol once.

How to add together User Codes without the Principal code on Kwikset SmartCode 915 and 916?

1. Keep the door open. Printing the Plan button once.
2. Printing the Lock symbol in one case.
3. Enter the new user code.
4. Press the Lock symbol once.

How to change the Master code on Kwikset SmartCode 915 and 916?

• Proceed the door open up. Press and HOLD the Program push until the Checkmark symbol illuminates (about 5 seconds).
• Printing the Checkmark symbol once.
• Enter new Main code.
• Press the Lock symbol one time.
• Re-enter the Chief code.
• Press the Lock symbol in one case.

Please note: If the screen is not pressed for xx seconds, the system volition time out(indicated by iii beeps and the "10" blueprint flashing 3 times), and you lot volition need to restart the process.

How to change the lawmaking on Kwikset SmartCode 917 and 955?

If you want to change the user code on Kwikset SmartCode 917, y'all have to delete this user lawmaking outset and so add together a new user code on n Kwikset SmartCode 917.

How to delete the user code on Kwikset SmartCode 917 and 955?

1. Make sure the door is open.
2. Printing and release the Program button if yous have not enabled a Programming Code. You will hear two beeps. If y'all have enabled a Programming Code, enter your Programming Lawmaking, then press the "Kwikset" push button. You will hear one brusk beep, and the keypad volition flash green.
3. Press the "2" button to delete a user code.
4. Yous will hear ane short beep, and the keypad will flash green.
5. Printing the "Kwikset" button.
6. Enter the User Lawmaking yous wish to delete.
7. Press the "Kwikset" button.
8. Enter the User Lawmaking Again.
9. Press the "Kwikset" button. You volition hear i long beep, and the keypad will flash green if successful. Information technology was unsuccessful if you hear three beeps and the keypad flashes red.

How to add a new user code on Kwikset SmartCode 917 and 955?

1. Make sure the door is open. Press and release the Programme push. Yous volition hear 2 beeps.
2. Press the "i" button. You will hear i short beep, and the keypad will flash green once.
3. Press the "Kwikset" push button.
4. Enter a new User Code. It must be between iv and 8 digits. (For security reasons, the commencement 4 digits of each user code must exist unique. For example, you are unable to program a user lawmaking ane·ii·3·4·5 equally well as a user code 1·ii·3·4·6. )
5. Press the "Kwikset" button.
6. You will hear one long beep, and the keypad will flash green if successful. Information technology was unsuccessful. Repeat step A if yous hear iii beeps and the keypad flashes red. Reinstall the bombardment cover.

How to change the programming code on Kwikset SmartCode 917 and 955?

1. Brand sure the door is open. Printing and release the Plan button if you take non enabled a Programming Code. Y'all will hear ii beeps. If you have enabled a Programming Code, enter your Programming Lawmaking, then press the "Kwikset" push. You lot will hear one curt beep, and the keypad will wink dark-green.
2. Printing the "3" button. Yous will hear ane brusque beep, and the keypad will flash green.
3. Pressthe "Kwikset" push button.
4. Enter a Programming Lawmaking. It must be between four and 8 digits. The Programming Code cannot be the same equally any user lawmaking.
5. Press the "Kwikset" button.
6. Re-enter the Programming Code.
7. Press the "Kwikset" button. Yous will hear 1 long beep, and the keypad will flash green if successful. Information technology was unsuccessful; if you hear iii beeps and the keypad flashes red—echo step A.

How to change the code on Kwikset Powerbolt 2?

To change the user code on Kwikset Powerbolt ii, you accept to delete this user code showtime and and so add together a new user code on Kwikset Powerbolt 2.

How to delete the user lawmaking on Kwikset Powerbolt 2?

1. Make sure the lock is unlocked and the door is open.
2. Enter your Chief code – for new installs, the default is 0-0-0-0.
3. Press the Lock push. You will hear i beep.
4. Press the "3" button.
5. Printing the Lock button. You will hear 1 beep.
6. Enter the User Code you wish to delete.
7. Press the Lock button. You will hear ii beeps if successful. If you hear 3 beeps, it was unsuccessful. Repeat step 1 slowly.

How to add together a new user code on Kwikset Powerbolt 2?

1. Brand sure the lock is unlocked and the door is open up.
2. Enter your Principal code – for new installs, the default is 0-0-0-0.
3. Press the Lock button. You will hear one beep.
4. Printing the "1" button.
5. Press the Lock button. You volition hear one beep.
6. Enter a new User Code. It must be 4-10 digits.
7. Press the Lock push. You will hear ii beeps if successful. If you hear three beeps, it was unsuccessful. Echo footstep 1 slowly.

How to modify the programming code on Kwikset Powerbolt 2?

1. Make certain the lock is unlocked and the door is open.
2. Enter your Master lawmaking – for new installs, the default is 0-0-0-0.
3. Press the Lock button. You volition hear one beep.
4. Press the "7" button.
5. Press the Lock button. You will hear one beep.
6. Enter a new Main code. It must be between 4 and 10 digits.
7. Press the Lock push. Yous will hear two beeps if successful. If yous hear three beeps, it was unsuccessful. Echo step one slowly.

If you lot need more assistance with Kwikset Powerbolt 2, please read this article: Kwikset Powerbolt 2 Troubleshooting: Stride by Step Guide!

How to change the code on Kwikset Halo and Aura?

To change the user code on Kwikset Halo and Aura, you must download and install Kwikset App. You can search Kwikset App from Google Play or the App Shop or scan the beneath barcode.

To modify the user lawmaking on Kwikset Halo and Aureola:

• Open the Kwikset app.
• Select the lock.
• Tap on the setting icon.
• Edit an Access Lawmaking.
• Enter your old user code and so enter a new user code.
• Save.

If you have more Kwikset Halo problems and need to solve them, delight visit this article: Kwikset Halo Troubleshooting: Quick Step by Step Guide.

FAQs Nearly How to Change Code on Kwikset Lock

What is kwikset programming code?

The Kwikset programming code is an optional, added-security measure out. It is not enabled past default. A Kwikset programming code is used to add together and delete user codes, but it cannot unlock the door (unless the aforementioned code is programmed as a user code, though this is not recommended). The Kwikset programming code must be four-8 digits.

What if forget Kwikset programing code?

Now yous will have to factory reset your Kwikset locks, and so all associated with the Kwikset locks will be deleted. To know how to reset your Kwikset locks, please check this article: How to reset Kwikset lock?

Where is program button on kwikset lock?

For nearly Kwikset locks, its program button(reset button) is in the battery compartment of the interior assembly.

To find the programming button, please remove the battery cover from the interior associates, then you can find the programming push button of the Kwikset locks.

Conclusion

That's all you lot need to know about how to modify the Kwikset lock code. Yous tin can at present stop worrying near whether or not your Kwikset Deadbolt is secure enough because information technology will be!

Delight note that ShineACS Locks is only writing the Kwikset lock performance commodity and providing possible handling suggestions, not offering after-sales service. If y'all can't finally solve your problem with our commodity content, please get in touch with the Official aftermarket.

Withal, if you want to change your current lock, yous can bank check out our TTLOCK smart lock to help you manage your door more than safely and conveniently with your telephone.

More than Kwikset locks troubleshooting:

1. How to rekey Kwikset smart lock?
2. Kwikset Kevo Lock Troubleshooting
3. How to Unlock Kwikset Lock?
4. How to Remove a Kwikset Deadbolt?
5. How To Install A Kwikset Deadbolt?

Source: https://www.acslocks.com/how-to-change-code-on-kwikset-lock/

Share this post